High-Pressure hydraulic hose reel w/45' hose heated oil at all times!!

• Will produce 10,000 PSI of hydraulic working pressure for hydraulic jacks and rams
  Connects directly into crane's hydraulic system
• Four-gallon of hydraulic oil supply dedictated for tools
• Will operate with a minimum of 6 gpm or a maximum of 40 gpm of hydraulic flow
• Will operate with a minimum of 2500 PSI to a maximum of 4500 PSI working pressure
• Pressure and flow will self-regulate
• Will operate on 12 or 24 volt system
• Equipped with a 12 or 24 volt thermostatic controlled heat element to maintain warm hydraulic oil
• All models standard with adjustable flow to the tool
• Has an in-line filter on return line from the tool to the supply tank

Heavy-duty remote control with magnet

• Programmable for single or double functions
• Note: Radio remote control system allows operator to stay out of harm's way.
• Replacement controls can be easily programmed on the spot
• Manual override control standard on all units

T-Line with high-pressure shut-off valves and quick couplers for operating two hydraulic tools at one time

• Single hose reel with 45' of high-pressure hose and quick couplers: standard on SC10 system
• Note: Single system is pressure up and gravity down.
• Dual hose reels with 45' of high-pressure hose and quick couplers: standard on SC10D system
• Note: Dual system is power up and power down, used with 150, 200 & 250 ton jacks and some hydraulic rams.
• When not in use, the supply lines are connected to a quick-coupler, which has a return line back to supply tank, so that cold oil can be cycled back to tank before operating in cold weather; thus warm oil is in the supply lines for the jacks and rams.
• Note: Dual system can also be used the same as a single system, with power up and gravity down, by keeping one line connected to the tank return line.

SC10D dual system standard with dual-pressure read out gauges on front panel

• Hydraulic flow does not slow down under pressure
• The ACI Super Charger system completely replaces the air over hydraulic foot pumps and the aggravation of having the air lines freeze in cold weather conditions.
• No more fighting the tangled air lines and hydraulic hoses being wrapped around other tools; simply pull out the hydraulic hose, connect to tool, and press the remote control button.